los angeles miscellaneous in Los Angeles, California For Sale

Contact the seller
xxxx-Current 4.3L Remanufactured Vortec Marine Engine We carefully select only the most premium, low-hour engines to professionally remanufacture. These engines all undergo a 15-point inspection to insure quality, reliability and durability. To give you an idea of all that goes into our remanufactured engines the engine block and cylinder heads are completely disassembled, baked and blasted, checked again for cracks (magnafluxed), then reassembled using only the finest components. The engine block is always decked to insure proper sealing with the cylinder heads. The crank is either turned, polished or replaced, new Federal Mogul teflon-coated hypereutectic pistons (standard to .030 over) are installed, new or remanufactured rods, new Melling oil pump and timing set, new Hastings rings, new brass freeze plugs, new marine roller cam shaft and roller lifters (in applicable applications), new Durabond main bearings, cam bearings and rod bearings are used in all engines. Cylinder heads are 2-angle cut for proper seating, and all of our heads are resurfaced and not milled. Before shipping out each remanufactured engine, we pressure check, spin test and compression test the engine to ensure 100% quality and reliability. Most of our remanufactured engines come with the valve covers, marine oil pan, circulation pump and timing cover installed, unless otherwise specified. ORDER ONLINE NOW OR CALL 1-866-606-xxxx xxxx-Current 4.3L remanufactured Vortec marine engine (one piece rear main seal, roller cam and roller lifters). This motor has been professionally remanufactured to meet or exceed GM OEM marine engine stock specifications. This 4.3L engine is rated at 226-268 hp at the crank (depending on intake, carb, exhaust manifolds, etc). This 4.3L base engine will work in pre-xxxx applications with updated intake manifold and electric fuel pump. This 4.3L Vortec marine engine comes equipped with the following: 4.3L base engine includes: engine block, 4.3L Vortec cylinder heads, marine oil pan, circulation pump, harmonic balancer, roller cam roller lifters, roller rockers, corrosion resistant black urethane paint, and all internal parts.There is a $100 core charge in addition to the price of the engine. Rated at 226 hp @ xxxx RPM / 268 LB-FT @ xxxx RPM (actual power levels may vary depending on OEM calibration and application) Direct replacement for xxxx-xxxx 4.3L OMC, Volvo Penta, MerCruiser, etc. Will work in pre-xxxx applications with updated intake manifold and electric fuel pump Core Charge **VALVE COVERS NOT INCLUDED** **Additional Charge If you have a xxxx or later MPI application for updated front cover, oil pan and crank sensor.** ORDER ONLINE NOW OR CALL 1-866-606-xxxx ORDER ONLINE NOW OR CALL 1-866-606-xxxx ORDER ONLINE NOW OR CALL 1-866-606-xxxx